JIS B 2401 V-3.50x250.00
Vacuum flanges
Dimensions
| Inside Diameter | 250.00 mm |
| Cross Section | 3.50 mm |
| Series | V |
| Application | Vacuum flanges |
About This Size
JIS B 2401 V-3.50x250.00 is a V-series metric O-ring (V series (dynamic / higher pressure)) with 250.00 mm inside diameter and 3.50 mm cross section. It is categorized for vacuum flanges in Japanese industrial equipment, hydraulic ports, and export machinery built to JIS drawings. Nominal static groove depth at 75% of cross section gives ~25.0% compression. We supply this size in NBR, FKM, EPDM, VMQ, HNBR, and PTFE with MOQ from one piece.
Groove Design Quick Reference
Adjacent Sizes
Cross-Standard Reference
| Standard | Nearest Size | ID Δ | CS Δ |
|---|---|---|---|
| AS568 | AS568-273 | 2.76 mm | 0.03 mm |
| ISO 3601 | 250.00x2.65 | 0.00 mm | 0.85 mm |
Cross-reference values are catalog nearest matches — always verify groove width, depth, and tolerance class on your drawing before substituting standards.
Compression Rate Guidance
- Static seals: 15–25% compression is ideal for most fixed applications.
- Dynamic seals: 10–20% compression to reduce friction and wear.
- Groove width should typically be 1.1 to 1.3 times the O-ring cross section.
- Surface finish: Ra 0.8–3.2 µm for static, Ra 0.4–0.8 µm for reciprocating dynamic service.
Typical Applications
- Dynamic hydraulic & rod seals
V-series sizes target reciprocating rods, swivels, and moderate-pressure hydraulic circuits on Japanese OEM equipment.
- Large static flange seals
At 250 mm ID, this size serves tank lids, heat exchanger covers, and large-bore pipeline flanges.
- Construction & mining equipment
Common on excavator cylinders, crusher housings, and other high-load static joints with generous gland geometry.
Tolerance & Standard Notes
JIS B 2401 defines metric ID and cross-section increments by series. Always match the series letter (P, G, or V) on the drawing — do not assume interchangeability with ISO 3601 even when dimensions look similar.
For tolerance details, see the O-Ring Tolerance Guide.
Design FAQ
What does JIS V series mean for size V-3.50x250.00?
V series (dynamic / higher pressure) — intended for reciprocating rods, rotating shafts, and moderate-pressure hydraulic service.
What groove dimensions suit JIS V-3.50x250.00?
Target groove depth ≈ 2.63 mm and width ≈ 4.20 mm for static service. V-series dynamic glands may use 10–20% squeeze — confirm rod/bore clearance on your drawing.
Can I substitute ISO 3601 250.00x2.65 for JIS V-3.50x250.00?
ISO 250.00x2.65 is the nearest catalog match (ID Δ 0.00 mm, CS Δ 0.85 mm). JIS and ISO tolerance rules differ — compare both tables before substituting on Japanese equipment.
Do you supply custom JIS sizes?
Yes. We manufacture custom metric O-rings from 0.5 mm to 2000 mm ID. Send your groove drawing or JIS size code for a quote within 24 hours.
What hardness should I specify?
70 Shore A suits most static P-series glands. Use 80–90 Shore A for V-series dynamic service or when extrusion gap is tight. Match material to fluid and temperature per our chemical compatibility tool.
Need JIS B 2401 V-3.50x250.00 in bulk?
Stock sizes ready to ship. Custom materials (NBR, FKM, EPDM, VMQ). MOQ 1 piece — quote in 24 hours.
Related Resources
JIS B 2401 Chart
Browse the full JIS series when you need adjacent P, G, or V sizes for Japanese equipment.
View JIS chartSize Converter
Cross-reference this JIS size against imperial and ISO options before substitution.
Open size converterCompression Calculator
Use the calculator to verify squeeze after converting JIS dimensions into your groove layout.
Calculate compressionJIS PDF Download
Request the printable JIS B 2401 chart for sourcing and inspection reference.
Request JIS PDF