Need O-rings fast? We reply within 24 hours.WhatsAppEmail us
O-Ring Supply Co.
ISO Certified
10,000+ O-Ring Sizes
Custom Manufacturing

JIS B 2401 P-3.10x6.70

Static seals

Dimensions

Inside Diameter6.70 mm
Cross Section3.10 mm
SeriesP
ApplicationStatic seals

About This Size

JIS B 2401 P-3.10x6.70 is a P-series metric O-ring (P series (general purpose)) with 6.70 mm inside diameter and 3.10 mm cross section. It is categorized for static seals in Japanese industrial equipment, hydraulic ports, and export machinery built to JIS drawings. Nominal static groove depth at 75% of cross section gives ~25.0% compression. We supply this size in NBR, FKM, EPDM, VMQ, HNBR, and PTFE with MOQ from one piece.

Groove Design Quick Reference

Recommended groove depth: 2.33 mm (75% of CS)
Recommended groove width: 3.72 mm (1.2× CS nominal)
Theoretical static compression: 25.0%
Status: Within 15–25% static target

Adjacent Sizes

Cross-Standard Reference

StandardNearest SizeID ΔCS Δ
AS568AS568-2020.76 mm0.43 mm
ISO 36017.50x2.650.80 mm0.45 mm

Cross-reference values are catalog nearest matches — always verify groove width, depth, and tolerance class on your drawing before substituting standards.

Compression Rate Guidance

  • Static seals: 15–25% compression is ideal for most fixed applications.
  • Dynamic seals: 10–20% compression to reduce friction and wear.
  • Groove width should typically be 1.1 to 1.3 times the O-ring cross section.
  • Surface finish: Ra 0.8–3.2 µm for static, Ra 0.4–0.8 µm for reciprocating dynamic service.

Typical Applications

  • Miniature fluid connectors

    At 6.7 mm ID, this size fits compact pneumatic couplings, sensor ports, and instrumentation glands where space is limited.

  • Medical & lab equipment

    Common in disposable fluid paths, diagnostic cartridges, and small valve bodies requiring reliable static sealing.

Tolerance & Standard Notes

JIS B 2401 defines metric ID and cross-section increments by series. Always match the series letter (P, G, or V) on the drawing — do not assume interchangeability with ISO 3601 even when dimensions look similar.

For tolerance details, see the O-Ring Tolerance Guide.

Design FAQ

What does JIS P series mean for size P-3.10x6.70?

P series (general purpose) — the default JIS B 2401 line for static flanges, hydraulic ports, and general industrial sealing.

What groove dimensions suit JIS P-3.10x6.70?

Target groove depth ≈ 2.33 mm and width ≈ 3.72 mm for static service. Verify gland width allows lateral O-ring movement during assembly.

Can I substitute ISO 3601 7.50x2.65 for JIS P-3.10x6.70?

ISO 7.50x2.65 is the nearest catalog match (ID Δ 0.80 mm, CS Δ 0.45 mm). JIS and ISO tolerance rules differ — compare both tables before substituting on Japanese equipment.

Do you supply custom JIS sizes?

Yes. We manufacture custom metric O-rings from 0.5 mm to 2000 mm ID. Send your groove drawing or JIS size code for a quote within 24 hours.

What hardness should I specify?

70 Shore A suits most static P-series glands. Use 80–90 Shore A for V-series dynamic service or when extrusion gap is tight. Match material to fluid and temperature per our chemical compatibility tool.

Need JIS B 2401 P-3.10x6.70 in bulk?

Stock sizes ready to ship. Custom materials (NBR, FKM, EPDM, VMQ). MOQ 1 piece — quote in 24 hours.

Request Free Quote

Related Resources

JIS B 2401 Chart

Browse the full JIS series when you need adjacent P, G, or V sizes for Japanese equipment.

View JIS chart

Size Converter

Cross-reference this JIS size against imperial and ISO options before substitution.

Open size converter

Compression Calculator

Use the calculator to verify squeeze after converting JIS dimensions into your groove layout.

Calculate compression

JIS PDF Download

Request the printable JIS B 2401 chart for sourcing and inspection reference.

Request JIS PDF