JIS B 2401 P-1.90x10.60
Static seals
Dimensions
| Inside Diameter | 10.60 mm |
| Cross Section | 1.90 mm |
| Series | P |
| Application | Static seals |
About This Size
JIS B 2401 P-1.90x10.60 is a P-series metric O-ring (P series (general purpose)) with 10.60 mm inside diameter and 1.90 mm cross section. It is categorized for static seals in Japanese industrial equipment, hydraulic ports, and export machinery built to JIS drawings. Nominal static groove depth at 75% of cross section gives ~25.0% compression. We supply this size in NBR, FKM, EPDM, VMQ, HNBR, and PTFE with MOQ from one piece.
Groove Design Quick Reference
Adjacent Sizes
Cross-Standard Reference
| Standard | Nearest Size | ID Δ | CS Δ |
|---|---|---|---|
| AS568 | AS568-013 | 0.22 mm | 0.12 mm |
| ISO 3601 | 10.60x1.80 | 0.00 mm | 0.10 mm |
Cross-reference values are catalog nearest matches — always verify groove width, depth, and tolerance class on your drawing before substituting standards.
Compression Rate Guidance
- Static seals: 15–25% compression is ideal for most fixed applications.
- Dynamic seals: 10–20% compression to reduce friction and wear.
- Groove width should typically be 1.1 to 1.3 times the O-ring cross section.
- Surface finish: Ra 0.8–3.2 µm for static, Ra 0.4–0.8 µm for reciprocating dynamic service.
Typical Applications
- Hydraulic & pneumatic fittings
Used in adapter threads, quick couplings, and valve spools where 1.9 mm cross section balances conformability and pressure rating.
- Automotive fuel & emissions
Typical in fuel injectors, EVAP valves, and small pump housings on North American and European platforms.
- Low-profile grooves
The thin cross section fits shallow glands in compact assemblies; verify extrusion gap carefully above 70 bar.
Tolerance & Standard Notes
JIS B 2401 defines metric ID and cross-section increments by series. Always match the series letter (P, G, or V) on the drawing — do not assume interchangeability with ISO 3601 even when dimensions look similar.
For tolerance details, see the O-Ring Tolerance Guide.
Design FAQ
What does JIS P series mean for size P-1.90x10.60?
P series (general purpose) — the default JIS B 2401 line for static flanges, hydraulic ports, and general industrial sealing.
What groove dimensions suit JIS P-1.90x10.60?
Target groove depth ≈ 1.42 mm and width ≈ 2.28 mm for static service. Verify gland width allows lateral O-ring movement during assembly.
Can I substitute ISO 3601 10.60x1.80 for JIS P-1.90x10.60?
ISO 10.60x1.80 is the nearest catalog match (ID Δ 0.00 mm, CS Δ 0.10 mm). JIS and ISO tolerance rules differ — compare both tables before substituting on Japanese equipment.
Do you supply custom JIS sizes?
Yes. We manufacture custom metric O-rings from 0.5 mm to 2000 mm ID. Send your groove drawing or JIS size code for a quote within 24 hours.
What hardness should I specify?
70 Shore A suits most static P-series glands. Use 80–90 Shore A for V-series dynamic service or when extrusion gap is tight. Match material to fluid and temperature per our chemical compatibility tool.
Need JIS B 2401 P-1.90x10.60 in bulk?
Stock sizes ready to ship. Custom materials (NBR, FKM, EPDM, VMQ). MOQ 1 piece — quote in 24 hours.
Related Resources
JIS B 2401 Chart
Browse the full JIS series when you need adjacent P, G, or V sizes for Japanese equipment.
View JIS chartSize Converter
Cross-reference this JIS size against imperial and ISO options before substitution.
Open size converterCompression Calculator
Use the calculator to verify squeeze after converting JIS dimensions into your groove layout.
Calculate compressionJIS PDF Download
Request the printable JIS B 2401 chart for sourcing and inspection reference.
Request JIS PDF
