ISO 3601 40.00x1.80
Standard Metric O-Ring Size
Dimensions
| Inside Diameter | 40.00 mm |
| Cross Section | 1.80 mm |
| Tolerance Class | N |
About This Size
ISO 3601 size 40.00x1.80 specifies a metric O-ring with 40.00 mm inside diameter and 1.80 mm cross section (1.80 mm (Group A miniature)). Dimensions follow the ISO 3601-1 series G (general-purpose) tolerance table; series A provides tighter limits for aerospace and precision assemblies. Using a nominal groove depth of 75% of cross section yields about 25.0% static compression — aligned with the 15–25% static sealing window. This size is commonly sourced for European machinery, hydraulic manifolds, and metric flange standards.
Groove Design Quick Reference
Adjacent Sizes
Cross-Standard Reference
| Standard | Nearest Size | ID Δ | CS Δ |
|---|---|---|---|
| AS568 | AS568-030 | 1.00 mm | 0.02 mm |
| JIS B 2401 | P-2.40x40.00 | 0.00 mm | 0.60 mm |
Cross-reference values are catalog nearest matches — always verify groove width, depth, and tolerance class on your drawing before substituting standards.
Compression Rate Guidance
- Static seals: 15–25% compression is ideal for most fixed applications.
- Dynamic seals: 10–20% compression to reduce friction and wear.
- Groove width should typically be 1.1 to 1.3 times the O-ring cross section.
- Surface finish: Ra 0.8–3.2 µm for static, Ra 0.4–0.8 µm for reciprocating dynamic service.
Typical Applications
- Cylinder & pump sealing
Well suited to cylinder end caps, gear pump covers, and actuator bodies in the 40 mm bore range.
- Industrial process equipment
Found on filter housings, dispensing heads, and medium-pressure flange joints in food, pharma, and chemical service.
- Low-profile grooves
The thin cross section fits shallow glands in compact assemblies; verify extrusion gap carefully above 70 bar.
Tolerance & Standard Notes
ISO 3601-1 series G dimensional tolerances apply to this catalog size; series A provides tighter ID and cross-section limits for aerospace and precision assemblies. The N letter is the ISO 3601-3 surface-quality grade and does not affect dimensional tolerance.
For tolerance details, see the O-Ring Tolerance Guide.
Design FAQ
What groove depth suits ISO 3601 40.00x1.80?
For static glands, target groove depth ≈ 1.35 mm (75% of the 1.80 mm cross section) and groove width ≈ 2.16 mm. Adjust for dynamic service (10–20% squeeze) using the compression calculator.
What does the N mean in ISO 3601 40.00x1.80?
The N is an ISO 3601-3 surface-quality acceptance grade (N = general purpose). It governs allowable surface defects such as flash, non-fills, and inclusions — it does not control the inside diameter or cross section. Dimensional tolerances come from ISO 3601-1: series G (general purpose) applies to this catalog size, and series A provides tighter limits for aerospace and precision assemblies.
What is the nearest AS568 dash number to ISO 40.00x1.80?
The closest AS568 catalog size is dash 030 (ID 1.614" / 41.00 mm, CS 0.070" / 1.78 mm). Verify both ID and CS on your groove before substituting imperial for metric.
What materials are available for this ISO size?
NBR, FKM, EPDM, VMQ, HNBR, and PTFE are commonly stocked. FFKM and specialty compounds are available on request with full lot traceability.
When do I need a backup ring for this cross section?
For 1.80 mm CS, use a PTFE backup ring when service pressure exceeds 100 bar (1,500 psi) or when diametral extrusion gap exceeds ~0.15 mm.
Need ISO 3601 40.00x1.80 in bulk?
Stock sizes ready to ship. Custom materials (NBR, FKM, EPDM, VMQ). MOQ 1 piece — quote in 24 hours.
Related Resources
ISO 3601 Chart
Browse neighboring metric sizes and series G/A tolerance data inside the full ISO 3601 reference.
View ISO 3601 chartSize Converter
Compare this metric size to AS568 or JIS alternatives before finalizing procurement.
Open size converterCompression Calculator
Validate groove squeeze and confirm your metric gland design before quoting.
Calculate compressionISO 3601 PDF Download
Request the printable metric chart for engineering checks and supplier cross-reference.
Request ISO 3601 PDF