Need O-rings fast? We reply within 24 hours.WhatsAppEmail us
O-Ring Supply Co.
ISO Certified
10,000+ O-Ring Sizes
Custom Manufacturing

ISO 3601 224.00x1.80

Standard Metric O-Ring Size

Dimensions

Inside Diameter224.00 mm
Cross Section1.80 mm
Tolerance ClassN

About This Size

ISO 3601 size 224.00x1.80 specifies a metric O-ring with 224.00 mm inside diameter and 1.80 mm cross section (1.80 mm (Group A miniature)). Dimensions follow the ISO 3601-1 series G (general-purpose) tolerance table; series A provides tighter limits for aerospace and precision assemblies. Using a nominal groove depth of 75% of cross section yields about 25.0% static compression — aligned with the 15–25% static sealing window. This size is commonly sourced for European machinery, hydraulic manifolds, and metric flange standards.

Groove Design Quick Reference

Recommended groove depth: 1.35 mm (75% of CS)
Recommended groove width: 2.16 mm (1.2× CS nominal)
Theoretical static compression: 25.0%
Status: Within 15–25% static target

Adjacent Sizes

Cross-Standard Reference

StandardNearest SizeID ΔCS Δ
AS568AS568-1742.08 mm0.82 mm
JIS B 2401P-3.50x224.000.00 mm1.70 mm

Cross-reference values are catalog nearest matches — always verify groove width, depth, and tolerance class on your drawing before substituting standards.

Compression Rate Guidance

  • Static seals: 15–25% compression is ideal for most fixed applications.
  • Dynamic seals: 10–20% compression to reduce friction and wear.
  • Groove width should typically be 1.1 to 1.3 times the O-ring cross section.
  • Surface finish: Ra 0.8–3.2 µm for static, Ra 0.4–0.8 µm for reciprocating dynamic service.

Typical Applications

  • Large hydraulic assemblies

    Supports heavy-duty cylinder heads, press platens, and mobile equipment covers at 224 mm nominal ID.

  • Pipeline & tank closures

    Used on manway covers, valve bonnets, and static flange joints where groove width allows a robust cross section.

  • Low-profile grooves

    The thin cross section fits shallow glands in compact assemblies; verify extrusion gap carefully above 70 bar.

Tolerance & Standard Notes

ISO 3601-1 series G dimensional tolerances apply to this catalog size; series A provides tighter ID and cross-section limits for aerospace and precision assemblies. The N letter is the ISO 3601-3 surface-quality grade and does not affect dimensional tolerance.

For tolerance details, see the O-Ring Tolerance Guide.

Design FAQ

What groove depth suits ISO 3601 224.00x1.80?

For static glands, target groove depth ≈ 1.35 mm (75% of the 1.80 mm cross section) and groove width ≈ 2.16 mm. Adjust for dynamic service (10–20% squeeze) using the compression calculator.

What does the N mean in ISO 3601 224.00x1.80?

The N is an ISO 3601-3 surface-quality acceptance grade (N = general purpose). It governs allowable surface defects such as flash, non-fills, and inclusions — it does not control the inside diameter or cross section. Dimensional tolerances come from ISO 3601-1: series G (general purpose) applies to this catalog size, and series A provides tighter limits for aerospace and precision assemblies.

What is the nearest AS568 dash number to ISO 224.00x1.80?

The closest AS568 catalog size is dash 174 (ID 8.737" / 221.92 mm, CS 0.103" / 2.62 mm). Verify both ID and CS on your groove before substituting imperial for metric.

What materials are available for this ISO size?

NBR, FKM, EPDM, VMQ, HNBR, and PTFE are commonly stocked. FFKM and specialty compounds are available on request with full lot traceability.

When do I need a backup ring for this cross section?

For 1.80 mm CS, use a PTFE backup ring when service pressure exceeds 100 bar (1,500 psi) or when diametral extrusion gap exceeds ~0.15 mm.

Need ISO 3601 224.00x1.80 in bulk?

Stock sizes ready to ship. Custom materials (NBR, FKM, EPDM, VMQ). MOQ 1 piece — quote in 24 hours.

Request Free Quote

Related Resources

ISO 3601 Chart

Browse neighboring metric sizes and series G/A tolerance data inside the full ISO 3601 reference.

View ISO 3601 chart

Size Converter

Compare this metric size to AS568 or JIS alternatives before finalizing procurement.

Open size converter

Compression Calculator

Validate groove squeeze and confirm your metric gland design before quoting.

Calculate compression

ISO 3601 PDF Download

Request the printable metric chart for engineering checks and supplier cross-reference.

Request ISO 3601 PDF